KHT 1000D probe calibration generator, ±100V to ±1000V, square wave / DC, accuracy ±0.5% to ±0.1%, rise time <14ns, USB interface. End user information and country of end use are required with purchase order

LF and DC adjustments are an essential step that should be carried out when connecting a probe to an oscilloscope for the first time.

This adjustment should ideally be carried out under the actual operating voltages at which the probe will later be used. Thanks to short rise and fall times and low overshoot, even fast high-voltage dividers can be evaluated, adjusted and calibrated. Our calibration generators are the optimal tool for these adjustments at real voltage levels.

The calibration generators for high-voltage probes KHT1000D and KHT6000D are used for precisely these LF and DC adjustments of high-voltage probes and dividers. The KHT6000C model is specifically only suitable for LF adjustments, i.e. not for DC adjustments.

In addition to manual operation using the controls on the front of the device, the calibration generators can also be operated using the optional 2m cable remote-control unit.

Go to remote control

Alternatively, the calibrator can be remote controlled via USB and optionally GPIB using the PC. In remote operation, the square wave voltage, pulse width, repetition frequency (single pulses possible) and the DC output voltage can be set.

All of our KHT models can also be optionally equipped with an interlock control cable (2 m) for connection to a closing contact (protective cover). The connection to the device is made using a LEMO push-pull connector on the back of the device.

Pulses and pulse shapes of the KHT1000D and KHT2000C series

The calibrators of the KHT1000D and KHT2000C series generate direct voltages and steep-edged, positive and negative square wave voltages up to ±1000 or ±2200V. The smallest adjustable amplitudes or DC voltages for the KHT1000D are 50V. The smallest adjustable amplitudes or DC voltages for the KHT2000C are 200V.

A positive or negative output voltage is optionally output at the output, so that both polarities can be tested without changing the probe. The edge steepness is identical for falling and rising edges. The output voltage, which can be switched between four ranges, is displayed digitally.

Pulses and pulse shapes of the KHT6000 series

The KHT6000C generates positive, steep-edged output voltages up to 6000V.

The KHT6000D also generates DC voltages and steep-edged, positive voltage signals up to 6000 V.

The output voltages of all KHT calibration generators are fully calibrated and meet the requirements of ISO 9000 ff for seamless test equipment monitoring.

Models & Specifications

		Order number	Article	Output	DC Accuracy	Rise time
£5,125.00 GBP excluding VAT Lead time 8-10 weeks	Datasheet Manual	894-235-000	KHT 1000D	± 100V - 1000V	± 0.5% - ±0.1%	< 14 ns
£7,575.00 GBP excluding VAT Lead time 4-6 weeks	Datasheet Manual	894-600-000	KHT 6000C	500 V - 6000 V, pulse only, unipolar	±0.2%	< 45 ns
£8,175.00 GBP excluding VAT Lead time 8-10 weeks	Datasheet Manual	894-600-010	KHT 6000D	500 V - 6000 V, Pulse + DC, unipolar	±0.2%	< 45 ns

Options

	Order number	Article
£1,400.00 GBP excluding VAT Lead time 8-10 weeks	GPIB-KHT1000	GPIB interface for KHT1000D (cannot be upgraded)
£1,675.00 GBP excluding VAT Lead time 8-10 weeks	RCU-KHT1000	Remote control unit (wired) for KHT1000D (cannot be upgraded)
£1,531.00 GBP excluding VAT Lead time 8-10 weeks	INTERL-KHT1K	Interlock-Option für KHT1000D (cannot be upgraded)
£560.00 GBP excluding VAT Lead time 8-10 weeks	KAL-KHT6000D	Calibration KHT6000
£530.00 GBP excluding VAT Lead time 8-10 weeks	KAL-KHT6000	Calibration KHT6000
£1,400.00 GBP excluding VAT Lead time 8-10 weeks	GPIB-KHT6000C	KHT 6000C Option: GPIB Interface
£1,600.00 GBP excluding VAT Lead time 8-10 weeks	GPIB-KHT6000D	KHT 6000D Option: GPIB Interface
£1,850.00 GBP excluding VAT Lead time 8-10 weeks	RCU-KHT6000D	KHT 6000D Option: Remote Control Unit
£1,675.00 GBP excluding VAT Lead time 8-10 weeks	RCU-KHT6000C	KHT 6000C Option: Remote Control Unit

High-Voltage Calibration Generators

Name: KHT 1000D probe calibration generator, ±100V to ±1000V, square wave / DC, accuracy ±0.5% to ±0.1%, rise time <14ns, USB interface. End user information and country of end use are required with purchase order
Brand: PMK
SKU: 894-235-000
Price: 5125.00 GBP
Availability: InStock