Power Supply 2ch PS02, 9V 20W with USB and LAN interface for remote control
£1,150.00 GBP
excluding VAT
UK stock — Qty: 2
Power Supplies PS-02/PS-03 with remote control capability
■ 100-240 V AC, 47-63 Hz input voltage
■ 550 mA /Channel max output current
■ 8 mV / 4 mV noise
■ 2, 4, 8 channels
■ ± 9 V output voltage, 20 W power
About our Power Supplies
The multi-channel power supplies PS-02 (2ch), PS-03 (4ch), or PS-06 (8ch) are the required power source for PMK’s active probes, which have adjustment possibilities but BNC interface for universal with any oscilloscope.
In combination with the PMK Probe Control software with graphical user interface, the power supply can be used to remote control, monitor and adjust compatible PMK probes via USB or additional optional LAN interface.
Long lifetime of more than 100,000 hours in 25°C environments and great performance are ensured with its high quality components. In alignment to EN60601-1-2, the internal switch-mode power supplies are tested with 4kV AC transient overvoltage by the manufacturer and fulfill EN 55011 Class B standard for conducted EMI, ensuring highest product safety and keeping the power supplies free from interference even in rough environments, where conventional power supplies might fail.
The pin assignment of the Lemo output connector with power supply paths and I2C communication can be reviewed in the datasheet.
Battery Pack AP-01
■ 8 mV / 4 mV noise
■ 1 channel
■ ± 9 V output voltage
■ 20 W power
Instead of the lab power supplies PS02/PS03 the battery pack AP-01 supplies active probes for >8 hours and enables their operation without additional power supply at any location, such as in test vehicles, wind turbines and any other portable measurement setups. The battery pack has neither USB nor LAN interface, and connected probes cannot be operated with the „PMK Probe Control" software.
The built-in battery has no ground reference and provides a symmetrical, bipolar supply with virtual ground by its integrated electronics. This ground is connected to the ground potential of the measurement instrument / oscilloscope. The external battery charger is tested in compliance with EN 60335-2-29/ IEC 335-2-29.
Tetris® Series Power Supply
| Order number | Article | |||
|---|---|---|---|---|
|
|
889-24V-INT | PS-01 INT (for EU, UK and USA) | |
Power Supplies for PMK active probes
| Order number | Article | Input Voltage | Output Current (max.) | Noise | Channels | Power | |||
|---|---|---|---|---|---|---|---|---|---|
|
£1,150.00 GBP excluding VAT
|
|
889-09V-PS2-L | 2ch Power supply for remote control with USB and LAN interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 5 mV RMS | 2 | 20 W | |
|
£1,425.00 GBP excluding VAT
|
|
889-09V-PS3-L | 4ch Power supply for remote control with USB and LAN interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 5 mV RMS | 4 | 40 W | |
|
£1,050.00 GBP excluding VAT
|
|
889-09V-PS3 | 4ch Power supply for remote control with USB interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 5 mV RMS | 4 | 40 W | |
|
£785.00 GBP excluding VAT
|
|
889-09V-PS2 | 2ch Power supply for remote control with USB interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 5 mV RMS | 2 | 20 W | |
|
£1,400.00 GBP excluding VAT
|
|
889-09V-PS6 | 8ch Power supply for remote control with USB interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 8 mV RMS | 8 | 60 W | |
|
£1,775.00 GBP excluding VAT
|
|
889-09V-PS6-L | 8ch Power supply for remote control with USB and LAN interface | 100-240 V AC, 47-63 Hz | 0.5 A DC continuous / channel | 8 mV RMS | 8 | 60 W | |
|
889-09V-AP01 | 1ch Battery pack, >8hrs operation, no remote control | 700 mA DC | 1 | 20 W | ||||
|
|
890-520-915 | Probe connection cable 1.6 m | ||||||
Power Supplies
8 products
Power Supply 4ch PS03, 9V 20W with LAN and USB interface for remote control
£1,425.00 GBP
excluding VAT
UK stock — Qty: 2
Power supply 4ch PS03, 9V 20W with USB interface for remote control
£1,050.00 GBP
excluding VAT
UK stock — Qty: 2
Power supply PS02 2-channel 9V 20W with USB interface for remote control
£785.00 GBP
excluding VAT
UK stock — Qty: 1
Power supply 8ch PS06, 9V 60W with USB interface for remote control
£1,400.00 GBP
excluding VAT
UK stock — Qty: 2
Power Supply 8ch PS06, 9V 60W with LAN and USB interface for remote control
£1,775.00 GBP
excluding VAT
UK stock — Qty: 2
Sidebar
Visual separator
Visual separator
UK Semiconductors Conference 2026
Visual separator
IEEE 27th Workshop on Control and Modeling for Power Electronics
Visual separator
Engineering Design Show 2026
