SMP Probes
■ Passive Probe for 1 MOhm Inputs
■ Contacts adjacent Pins in 2.54 mm Pitch
■ Working voltage max. 30 V rms
■ Interchangeable Spring Tips
■ Bandwidth up to 500 MHz
The passive probe series SMP is ideally suited for the analysis of SMD circuits. With its special Tshaped
design, any number of rectangular pins with 2.54 mm pitch can be contacted next to each
other and analyzed at the same time. A wide range of accessories for contacting allows easy and
individual adaptation to various DUTs of different SMD designs. Connect the SMP probes to any
measurement equipment with a 1 MΩ BNC input. The 500 MHz model offers lowest input capacitance
of 7 pF only. The SMP series are using TETRIS® unique Inline Probing System.
Read-Out (RO) in our probes is a physical pin, positioned in the BNC adapter. This read-out pin allows automatic adjustment of the oscilloscope's settings, like scaling, based on the probe's attenuation factor so that the read out on the probe is correct.
Models & Specifications
| Article number | Attn. | B/W | Input Impedance | Rise Time | Cable Length | |||
|---|---|---|---|---|---|---|---|---|
|
855-700-T01 | 1:1 | 35 MHz | 1 MΩ || 45 pF | 10 ns | 1.3 m | ||
|
855-700-T02 | 2:1 | 50 MHz | 2 MΩ || 40 pF | 7 ns | 1.3 m | ||
|
855-700-T05 | 5:1 | 250 MHz | 5 MΩ || 13.5 pF | 1.4 ns | 1.3 m | ||
|
855-700-T10 | 10:1 | 500 MHz | 10 MΩ || 7 pF | 700 ps | 1.3 m | ||
|
855-700-T11 | 10:1 | 500 MHz | 10 MΩ || 7 pF | 700 ps | 1.3 m | ||
SMP Probe Series
5 products
Sidebar
Visual separator
Visual separator
UK Semiconductors Conference 2026
Visual separator
IEEE 27th Workshop on Control and Modeling for Power Electronics
Visual separator
Engineering Design Show 2026
